GTM Logo

GTM Coupé Page 52

February 2011

Things have slowed slightly on the car, it is being used for frequent journeys to work, and hasn't had any major problems.

fuse heatshrunk
fuse connections heat shrunk

The connections to the fuse box were finally cleaned up and covered with some heat shrink, before a coat of silicon grease was applied to prevent further corrosion.

A few of the things I have been planning to fit for a while got done, when I had a few minutes free. First to be fitted was an external pull handle for the electric cut-off. This needed to be fitted at the bottom of the "A" pillar. So a hole was drilled and a small notch was "scalloped" out to allow it to slope backwards slightly. The internal connection will be taken care of later.